Skip to content
FidaraDental Supply
Cart

Catalogue

Equipment, organised by the bench it sits on

Every unit below is specified for laboratory use at production volume rather than occasional chairside work.

Casting & Injection

Injection and casting systems for thermoplastic partials and cast frameworks in routine volume.

View category
Automatic flexible denture injection system, three-quarter view showing the extended flask clamp and control panel

Injection System

Automatic Flexible Denture Injection System

$550.00
Manual screw press frame with spring columns beside the gray temperature controller with red heating indicator

Denture Injection System

LZYY-I Denture Injection System: Integrated Press and Heater

$332.00
Split injection set with T-handle screw press and the square heater box mounted on the temperature controller

Split Denture Injection System

LZYY-II Split Denture Injection System: Separate Heater and Press

$240.00
Pneumatic denture injector with pressure gauge and regulator panel, heater controller and foot pedal with orange air hose

Pneumatic Denture Injector

LZYY-III Pneumatic Denture Injector: Air-Driven Injection Press

$360.00
Red and white floor-standing casting machine on casters with Fidara logo and dual digital meters on the sloped control panel

Induction Casting Machine

LZZP-1 Induction Casting Machine: Medium Frequency, Air-Cooled

$1,750.00

Cleaning & Dust Extraction

Ultrasonic baths and extraction for keeping instruments, castings and the bench itself workable.

View category
JT-69 dust collection cover, open three-quarter view showing the interior suction inlet, side compartments and elbow-rest layout

Dust Collection Cover

JT-69 Dust Collection Cover: Dental Workstation Vacuum Shield with LED Lighting

$170.00
Blue and white floor-standing steam cleaner on casters with pressure gauge, red switch, control panel and steam hose, shown in a promotional frame titled Dental Lab Steam Cleaner with 22L Volume

High-Pressure Steam Cleaner

LZQX-I High-Pressure Steam Cleaner: 22L Dental Lab Steamer

$260.00
White automatic steam cleaner unit with blue coiled steam hose, brass fittings, red and green buttons and pressure gauge on top, shown in a promotional frame titled Dental Automatic Steam Cleaner

Automatic Steam Cleaner

LZQX-II Automatic Steam Cleaner: 5L High-Pressure Dental Steam Cleaning Machine

$490.00
White benchtop dust collector unit with Fidara branding, front knob, red rocker switch, power inlet and a side rating sticker, shown in a promotional frame titled Dental Portable Vacuum

Benchtop Dust Collector

LZXC-I Benchtop Dust Collector: Portable Dental Lab Vacuum

$85.00

Forming & Pressing

Flask closure and sheet thermoforming — the two points in the workflow where a millimetre of drift becomes a remake.

View category
LZCX-I vacuum forming machine with the heater head swung up and back, showing the perforated bead tray, the clamp frame and the red forming lever on the right

Vacuum Forming Machine

LZCX-I Vacuum Forming Machine: Bead Bed

$65.00
White benchtop film cutting machine with red button, adjustment dial, Insert Close dock and black hot-knife handpiece, shown in a promotional frame titled Dental Orthodontic Diaphragm cutting Machine

Diaphragm Cutting Machine

LZMQ-1 Diaphragm Cutting Machine: Hot-Tipped Knife for Orthodontic Film

$49.00

Furnace & Thermal Processing

Programmable firing with vacuum, for layered ceramics where trapped air only shows up after glaze.

View category
White benchtop burnout furnace with closed door, black lever handle and a PV/SV digital controller

Wax Burnout Furnace

ML-15 Wax Burnout Furnace: 2 kW Digital Control

$160.00
PHOENIX-7 porcelain furnace, packed in shipping cartons with corner protectors on a warehouse trolley

Porcelain Furnace

PHOENIX-7 Porcelain Furnace: Vacuum Firing to 1200 °C

$1,400.00

Hand Instruments

Wax knives, carvers and the small tools that live in a technician's hand all day, priced for the bench rather than the display case.

View category
Rear view of the unit showing the red rocker power switch, adjustment knob, ventilation grille and attached power cable

Electronic Wax Carving Heater

J28-3 Electronic Wax Carving Heater: Induction, Flame-Free

$33.00
Rear view of the waxer base showing the IEC power inlet and an inset of the supplied EU-style plug, with six tips in the top holes

Electric Waxer, Twin Pen

M800 Electric Waxer: Twin Pen with 6 Tips

$35.00

Lab Infrastructure

Workbenches, suction and air supply — the infrastructure a lab buys once and then stops thinking about.

View category
Render of the grey plastic sedimentation tank with its transparent latched lid, internal divider layout and corrugated inlet hose

Plastic Sedimentation Tank

LZ Plastic Gypsum Sedimentation Tank: Compact Clear-Lid

$28.00
Studio render of the brushed stainless sedimentation tank showing the lid holes, side carry handles and grey drain hose

Stainless Sedimentation Tank

LZ Stainless Steel Gypsum Sedimentation Tank: Large 60 cm

$150.00
Studio render of the white and yellow LZ120-S1 single workstation showing the articulated magnifying lamp, two grey armrests, air gun and right-side drawer bank

Laboratory Workstation

LZ120-S1 Dental Lab Workstation: 1.2m Single Technician

$420.00
Studio render of the blue and white two-person workstation with two magnifying lamps, four armrests and a central drawer bank

Laboratory Workstation

LZ175-S3 Dental Lab Workstation: 1.75m Two-Person

$590.00
Studio render of the red and white 2.15 m two-person workstation with two articulated lamps and drawer banks on both sides

Laboratory Workstation

LZ215-S7 Dental Lab Workstation: 2.15m Two-Person

$730.00

Mixing & Polymerisation

Pressure and heat applied on a timer, so a batch of denture bases cures the same way at nine in the morning as it does last thing at night.

View category
Stainless steel pressure pot with lid-mounted pressure gauge, front temperature gauge and control dial, black side handles and power cord

High-Pressure Polymerising Cooker

LZGY-I High-Pressure Polymerizing Cooker

$132.00
Side angle of the real unit showing the stainless lid handle, blue-handled drain valve and ventilation grille

Thermal Polymerizer

LZJH-I Thermal Polymerizer: Automatic Water-Bath Curing Unit

$340.00
LZJHQ curing pressure pot, raised three-quarter view showing the circular lid seal, clamp arm and stainless housing

Pressure Pot

LZJHQ Curing Pressure Pot: Heated, Timed

$90.00
Red and white agar mixer with lidded pot on top, dispensing lever and two digital temperature controllers, studio render

Agar Mixer

LZQJ-I Agar Mixer: 5 L Dental Duplicating Machine

$400.00
White agar mixer with lidded stainless pot, dispensing lever, touchscreen and power switch on the front panel, studio render

Agar Mixer, 11 L

LZQJ-III Intelligent Agar Mixer: 11 L Automatic Touchscreen

$580.00
White and red benchtop vacuum mixer with vacuum gauge, timer, control buttons and clear mixing cup on the platform, studio render

Vacuum Mixer

LZZKJ-3 Dental Vacuum Mixer: Built-in Pump with Vibration

$245.00
Red and white benchtop vacuum mixer with vacuum gauge, control knob and clear mixing cup under the drive head, studio render

Vacuum Mixer, Negative Pressure

LZZKJ-V Negative Pressure Vacuum Mixer: 500 ml Air-Driven

$186.00

Model Processing

Trimmers, vibrators and plaster saws — the bench where a model is poured, set and freed without a chipped margin.

View category
Three-quarter view of the grey hexagonal-base vibrator with a black round top plate and a LOW-HIGH dial on the front panel

Circular Vibrator

Circular Dental Vibrator: Compact Round Plate Shaker

$32.00
Front view of the red-and-white plaster saw showing the universal worktable with locking handle, the blade head above it, and front-panel Lock, Position, Light and Power controls

Plaster Saw

LZ-SGJ Electric Plaster Saw: Precision Gypsum Model Die Saw

$400.00
Three-quarter view of the red-and-cream arch trimmer with the clear splash guard raised and the carbide burr in the center of the top plate

Model Arch Trimmer

LZSC-I Model Arch Trimmer: Lingual Internal Grinder

$85.00
Three-quarter view of the white-and-green trimmer with the perforated work table swung out and a PARAMETERS sticker on the front panel

Wet Model Trimmer

LZSG-V Wet/Dry Model Trimmer: 750W Full Sand Disc

$300.00
Front view of the white wet model trimmer showing the diamond disc behind a chrome-edged guard and the perforated work table below

Model Trimmer, Diamond Disc

LZSG-VI Wet Model Trimmer: Diamond Disc

$204.61
Three-quarter view of the white square vibrator with black rubber platform top and the amplitude dial on the front panel

Square Plaster Vibrator

LZZD-180 Square Plaster Vibrator: Adjustable Amplitude

$40.00
Front view of the cream-and-red pindex machine showing the spring-loaded worktable on twin columns, the drill below and the laser head above

Laser Pindex Machine

LZZD-III Laser Pindex Machine: Pin Drilling Unit

$180.00

Surface Treatment

Blasting, electropolishing and abutment conditioning — the stations that decide how a framework looks after finishing.

View category
LZBP-1 sandblasting cabinet, side three-quarter view, showing the white housing, red-trimmed lid and the round gauntlet opening

Sandblaster

LZBP-1 Single-Pen Laboratory Sandblaster

$80.00
White twin-pen sandblaster with Fidara logo, viewing window, two glove ports, and red drawer pulled open at the base

Drawer Sandblaster

LZBP-V Twin-Pen Sandblaster with Drawer

$105.00
White and red twin-pen sandblaster cabinet with Fidara logo, viewing window, and two glove ports

Twin-Pen Sandblaster

LZBP-VI Twin-Pen Sandblaster: Dental Lab Oxide Removal

$105.00
Tall white mobile workstation on casters with Fidara logo, top control panel with gauge, handpiece holder, and foot pedal

Multifunction Sandblaster

LZBP-VIII Multifunction Sandblaster: Mobile Technician Workstation

$410.00
LZDJ-III electrolytic polisher at three-quarter angle, showing the stainless bath, the suspension bar spanning it with frameworks hanging, and the current and timing readouts on the right fascia

Electrolytic Polisher

LZDJ-III Electrolytic Polisher: Single Bath

$388.00
LZDZ-I electrolytic polisher, front elevation showing the control panel with both tank electrodes in position

Electrolytic Polisher

LZDZ-I Dual-Tank Electrolytic Polishing Unit

$145.00
Dark gray benchtop high-speed alloy grinder with Fidara logo, transparent safety shield, and control knobs on the base

High-Speed Cutting Lathe

LZGQ-II High-Speed Cutting Lathe: Dental Metal Grinder

$380.00
LZPG-I polishing lathe with a buffing mop mounted on each spindle, showing the cast base and the red rocker switch

Polishing Lathe

LZPG-I Double-Top Polishing Lathe

$75.00
Single-top polishing machine with grinding wheel on the left and a buffing wheel inside the white dust hood on the right

Single-Top Polishing Lathe

LZPG-II Single-Top Polishing Lathe: Grinding Wheel and Buffing Spindle

$78.20
Double-spindle polishing lathe with two hinged white hoods, cloth buffing wheel on the right spindle, and storage tray holding a power cord

Polishing Lathe, Hooded

LZPG-III Hooded Polishing Lathe: Double-Spindle with Protective Covers

$135.00
White powerful sandblaster cabinet with Fidara logo, top viewing window, glove port, pressure gauge, and regulator knob

Recycling Sandblaster

LZQP-A Powerful Sandblaster: Recycling Type-A

$140.00